DIN934 六角头螺母(1型) hexagon full nuts
螺纹尺寸
d | |
| P | 螺距 | 粗牙 | | 细牙1 | | 细牙2 | | m | 最大值=公称 |
| | 最小值 |
| | mw | 最小值 |
| | s | 最大值=公称 |
| | 最小值 |
| | e ① | 最小值 |
| | * |
| | 千件重(钢制)≈kg |
|
| | 0.25 | 0.25 | 0.3 | 0.35 | 0.35 | 0.4 | 0.45 | 0.45 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | 1 | | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | | 0.8 | 1 | 1.2 | 1.3 | 1.4 | 1.6 | 1.8 | 2 | 2 | 2.4 | 2.8 | 3.2 | 4 | 5 | 5.5 | 6.5 | | 0.55 | 0.75 | 0.95 | 1.05 | 1.15 | 1.35 | 1.55 | 1.75 | 1.75 | 2.15 | 2.55 | 2.9 | 3.7 | 4.7 | 5.2 | 6.14 | | 0.44 | 0.6 | 0.76 | 0.84 | 0.92 | 1.08 | 1.24 | 1.4 | 1.4 | 1.72 | 2.04 | 2.32 | 2.96 | 3.76 | 4.16 | 4.91 | | 2.5 | 3 | 3 | 3.2 | 3.5 | 4 | 4.5 | 5 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | | 2.4 | 2.9 | 2.9 | 3.02 | 3.38 | 3.82 | 4.32 | 4.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | | 2.71 | 3.28 | 3.28 | 3.41 | 3.82 | 4.32 | 4.88 | 5.45 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | | 0.03 | 0.054 | 0.063 | 0.076 | 0.1 | 0.142 | 0.2 | 0.28 | 0.72 | 0.384 | 0.514 | 0.81 | 1.23 | 2.5 | 3.12 | 5.2 |
|
螺纹尺寸
d | |
| P | 螺距 | 粗牙 | | 细牙1 | | 细牙2 | | m | 最大值=公称 |
| | 最小值 |
| | mw | 最小值 |
| | s | 最大值=公称 |
| | 最小值 |
| | e ① | 最小值 |
| | * |
| | 千件重(钢制)≈kg |
|
| | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | | 1 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 1.5 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | | 1.25 | 1.25 | / | / | 2 | 1.5 | 2 | / | / | / | / | / | / | / | / | / | | 8 | 10 | 11 | 13 | 15 | 16 | 18 | 19 | 22 | 24 | 26 | 29 | 31 | 34 | 36 | 38 | | 7.64 | 9.64 | 10.3 | 12.3 | 14.3 | 14.9 | 16.9 | 17.7 | 20.7 | 22.7 | 24.7 | 27.4 | 29.4 | 32.4 | 34.4 | 36.4 | | 6.11 | 7.71 | 8.24 | 9.84 | 11.44 | 11.92 | 13.52 | 14.16 | 16.56 | 18.16 | 19.76 | 21.92 | 23.52 | 25.9 | 27.5 | 29.1 | | 17 | 19 | 22 | 24 | 27 | 30 | 32 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | | 16.73 | 18.67 | 21.67 | 23.67 | 26.16 | 29.16 | 31 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | | 18.9 | 21.1 | 24.49 | 26.75 | 29.56 | 32.95 | 35.03 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | | 11.6 | 17.3 | 25 | 33.3 | 49.4 | 64.4 | 79 | 110 | 165 | 223 | 288 | 393 | 502 | 652 | 800 | 977 |
|
螺纹尺寸
d | |
| P | 螺距 | 粗牙 | | 细牙1 | | 细牙2 | | m | 最大值=公称 |
| | 最小值 |
| | mw | 最小值 |
| | s | 最大值=公称 |
| | 最小值 |
| | e ① | 最小值 |
| | * |
| | 千件重(钢制)≈kg |
|
| | 5 | 5.5 | 5.5 | 6 | 6 | / | / | / | / | / | / | / | / | / | / | | 3 | 4 | 4 | 4 | / | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | | / | / | / | / | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | / | / | | 42 | 45 | 48 | 51 | 54 | 58 | 61 | 64 | 68 | 72 | 80 | 88 | 100 | 112 | 128 | | 40.4 | 43.4 | 46.4 | 49.1 | 52.1 | 56.1 | 59.1 | 62.1 | 66.1 | 70.1 | 78.1 | 85.8 | 97.8 | 109.8 | 125.5 | | 32.3 | 34.7 | 37.1 | 39.3 | 41.7 | 44.9 | 47.3 | 49.7 | 52.9 | 56.1 | 62.5 | 68.6 | 78.2 | 87.8 | 100 | | 80 | 85 | 90 | 95 | 100 | 105 | 110 | 115 | 120 | 130 | 145 | 155 | 180 | 200 | 230 | | 78.1 | 82.8 | 87.8 | 92.8 | 97.8 | 102.8 | 107.8 | 112.8 | 117.8 | 127.5 | 142.5 | 152.5 | 177.5 | 195.4 | 225.4 | | 88.25 | 93.56 | 99.21 | 104.86 | 110.51 | 116.16 | 121.81 | 127.46 | 133.11 | 144.08 | 161.02 | 172.32 | 200.57 | 220.8 | 254.7 | | - | - | - | - | - | - | - | - | - | - | - | 170 | 196 | 216 | 248 | | 1220 | 1420 | 1690 | 1980 | 2300 | 2670 | 3040 | 3440 | 3930 | 4930 | 6820 | 8200 | 13000 | 17500 | 26500 |
|
①,* 在尺寸为M110或更大的情况下，六角形边缘可以是圆角。
②,本标准已被ISO 4032、ISO 8673和ISO 8674替代
③,材料
a)钢，性能等级: ≤M2.5: 6; M3~M39:6,8,10; > M39: 按协议。标准DIN 267-4
b)不锈钢，性能等级: ≤M39: A2-70, A4-70; >M39: 按协议。标准DIN 267-11
c)有色金属，性能等级：按协议。标准DIN 267-18 |
| 材料 | |
| 通用要求 | | 螺纹 | 公差 |
| | 标准 |
| | 机械性能 | 等级 |
| | 标准 |
| | 公差 | 产品等级 |
| | 标准 |
| | 表面处理 | - |
| | - |
| | 表面粗糙度 | | 表面缺陷 | | 验收及包装 |
| | DIN 267 part 1 | | 6H | | DIN 13 part 12,15 | ＜M3：6
≥ M3 ≤M39： 6，8，10
＞M39：按协议 | ≤ M39：A2-70，A4-70
＞M39：按协议 | 待定 | | DIN 267 part 4 | DIN 267 part 11 | DIN 267 part 18 | ≤ M16：A
＞M16：B | | DIN ISO 4759 part 1 | | 不经处理 | blank | blank | 电镀 DIN 267 part 9
热浸镀锌 DIN 267 part 10
DIN 267 part 21 applies to the expansion test | | DIN 267 part 2 | | DIN 267 part 20 | | DIN 267 part 5 |
|
