DIN427 开槽平端紧定螺钉(半牙) slotted set srews with chamfered end ISO2342 GB73-85
螺纹尺寸
d | |
| P | 螺距 |
| | b | 最小值=公称 |
| | 最大值 |
| | ds | 最大值=公称 |
| | 最小值 |
| | n | 公称 |
| | 最小值 |
| | 最大值 |
| | t | 最大值 |
| | 最小值 |
| | df | | U | 最大值 |
| | x | 最大值 |
|
| | 0.25 | 0.25 | 0.3 | 0.35 | 0.4 | 0.45 | 0.5 | 0.6 | 0.7 | | 1.2 | 1.4 | 1.7 | 1.9 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | | 1.70 | 1.90 | 2.30 | 2.60 | 3.20 | 3.90 | 4.60 | 5.40 | 6.20 | | 1 | 1.2 | 1.4 | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | | 0.86 | 1.06 | 1.26 | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | | 0.2 | 0.2 | 0.2 | 0.25 | 0.25 | 0.4 | 0.4 | 0.5 | 0.6 | | 0.26 | 0.26 | 0.26 | 0.31 | 0.31 | 0.46 | 0.46 | 0.56 | 0.66 | | 0.4 | 0.4 | 0.4 | 0.45 | 0.45 | 0.6 | 0.6 | 0.7 | 0.8 | | 0.52 | 0.52 | 0.63 | 0.74 | 0.84 | 0.95 | 1.05 | 1.21 | 1.42 | | 0.4 | 0.4 | 0.48 | 0.56 | 0.64 | 0.72 | 0.8 | 0.96 | 1.12 | | 0.8 | 0.96 | 1.12 | 1.28 | 1.6 | 2 | 2.4 | 2.8 | 3.2 | | 0.5 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1 | 1.2 | 1.4 | | 0.625 | 0.625 | 0.75 | 0.875 | 1 | 1.125 | 1.25 | 1.5 | 1.75 |
|
| |
螺纹尺寸
d | |
| P | 螺距 |
| | b | 最小值=公称 |
| | 最大值 |
| | ds | 最大值=公称 |
| | 最小值 |
| | n | 公称 |
| | 最小值 |
| | 最大值 |
| | t | 最大值 |
| | 最小值 |
| | df | | U | 最大值 |
| | x | 最大值 |
|
| | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | | 6 | 7.2 | 9.6 | 12 | 14 | 16 | 18 | 20 | 22 | | 7.60 | 9.20 | 12.10 | 15.00 | 17.50 | 20.00 | 22.00 | 25.00 | 27.00 | | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | | 4.82 | 5.82 | 7.78 | 9.78 | 11.73 | 13.73 | 15.73 | 17.73 | 19.67 | | 0.8 | 1 | 1.2 | 1.6 | 2 | 2 | 2.5 | 3 | 3 | | 0.86 | 1.06 | 1.26 | 1.66 | 2.06 | 2.06 | 2.56 | 3.06 | 3.06 | | 1 | 1.2 | 1.51 | 1.91 | 2.31 | 2.31 | 2.81 | 3.31 | 3.31 | | 1.63 | 2 | 2.5 | 3 | 3.7 | 4.2 | 4.2 | 5.2 | 5.2 | | 1.28 | 1.6 | 2 | 2.4 | 2.8 | 3.2 | 3.2 | 4 | 4 | | 4 | 4.8 | 6.4 | 8 | 9.6 | 11.2 | 12.8 | 14.4 | 16 | | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 4 | 5 | 5 | | 2 | 2.5 | 3.125 | 3.75 | 4.375 | 5 | 5 | 6.25 | 6.25 |
|
| |
