DIN125-B 平垫(带倒角) mediun washers
| 规格 | |
| M | 对应螺栓规格 |
| | d | 最小值=公称 |
| | 最大值 |
| | dc | 最大值=公称 |
| | 最小值 |
| | h | 公称 |
| | 最大值 |
| | 最小值 |
| | da | 最大值 |
| | 最小值 |
| | r | ≈ |
| | 千件重(钢制)≈kg |
| | M1.6 | M1.7 | M2 | M2.3 | M2.5 | M2.6 | M3 | M3.5 | M4 | M5 | M6 | M7 | M8 | M10 | M12 | M14 | | 1.7 | 1.8 | 2.2 | 2.5 | 2.7 | 2.8 | 3.2 | 3.7 | 4.3 | 5.3 | 6.4 | 7.4 | 8.4 | 10.5 | 13 | 15 | | 1.84 | 1.94 | 2.34 | 2.64 | 2.84 | 2.94 | 3.38 | 3.88 | 4.48 | 5.48 | 6.62 | 7.62 | 8.62 | 10.77 | 13.27 | 15.27 | | 4 | 4.5 | 5 | 6 | 6 | 7 | 7 | 8 | 9 | 10 | 12 | 14 | 16 | 20 | 24 | 28 | | 3.70 | 4.20 | 4.70 | 5.70 | 5.70 | 6.64 | 6.64 | 7.64 | 8.64 | 9.64 | 11.57 | 13.57 | 15.57 | 19.48 | 23.48 | 27.48 | | 0.3 | 0.3 | 0.3 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.8 | 1 | 1.6 | 1.6 | 1.6 | 2 | 2.5 | 2.5 | | 0.35 | 0.35 | 0.35 | 0.55 | 0.55 | 0.55 | 0.55 | 0.55 | 0.9 | 1.1 | 1.8 | 1.8 | 1.8 | 2.2 | 2.7 | 2.7 | | 0.25 | 0.25 | 0.25 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.7 | 0.9 | 1.4 | 1.4 | 1.4 | 1.8 | 2.3 | 2.3 | | 2 | 2.1 | 2.6 | 2.9 | 3.1 | 3.2 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | 7.8 | 9.2 | 11.2 | 13.7 | 15.7 | | 1.8 | 1.9 | 2.4 | 2.7 | 2.9 | 3 | 3.4 | 3.9 | 4.5 | 5.5 | 6.6 | 7.6 | 9 | 11 | 13.5 | 15.5 | | 0.15 | 0.15 | 0.15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.4 | 0.4 | 0.4 | 0.4 | | 0.024 | 0.031 | 0.037 | 0.092 | 0.088 | 0.127 | 0.119 | 0.155 | 0.308 | 0.443 | 1.02 | 1.39 | 1.83 | 3.57 | 6.27 | 8.62 |
|
| 规格 | |
| M | 对应螺栓规格 |
| | d | 最小值=公称 |
| | 最大值 |
| | dc | 最大值=公称 |
| | 最小值 |
| | h | 公称 |
| | 最大值 |
| | 最小值 |
| | da | 最大值 |
| | 最小值 |
| | r | ≈ |
| | 千件重(钢制)≈kg |
| | M16 | M18 | M20 | M22 | M24 | M26 | M27 | M28 | M30 | M32 | M33 | M35 | M36 | M38 | M39 | M40 | | 17 | 19 | 21 | 23 | 25 | 27 | 28 | 29 | 31 | 33 | 34 | 36 | 37 | 39 | 40 | 41 | | 17.27 | 19.33 | 21.33 | 23.33 | 25.33 | 27.33 | 28.33 | 29.33 | 31.39 | 33.62 | 34.62 | 36.62 | 37.62 | 39.62 | 40.62 | 41.62 | | 30 | 34 | 37 | 39 | 44 | 50 | 50 | 50 | 56 | 60 | 60 | 66 | 66 | 72 | 72 | 72 | | 29.48 | 33.38 | 36.38 | 38.38 | 43.38 | 49.38 | 49.38 | 49.38 | 55.26 | 58.80 | 58.80 | 64.80 | 64.80 | 70.80 | 70.80 | 70.80 | | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 5 | 5 | 5 | 5 | 6 | 6 | 6 | | 3.3 | 3.3 | 3.3 | 3.3 | 4.3 | 4.3 | 4.3 | 4.3 | 4.3 | 5.6 | 5.6 | 5.6 | 5.6 | 6.6 | 6.6 | 6.6 | | 2.7 | 2.7 | 2.7 | 2.7 | 3.7 | 3.7 | 3.7 | 3.7 | 3.7 | 4.4 | 4.4 | 4.4 | 4.4 | 5.4 | 5.4 | 5.4 | | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 28.4 | 30.4 | 31.4 | 33.4 | 35.4 | 36.4 | 38.4 | 39.4 | 41.4 | 42.4 | 43.6 | | 17.5 | 20 | 22 | 24 | 26 | 28 | 30 | 31 | 33 | 35 | 36 | 38 | 39 | 41 | 42 | 43 | | 0.4 | 0.6 | 0.7 | 0.7 | 0.7 | 0.7 | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 | 1.3 | | 11.3 | 14.7 | 17.2 | 18.3 | 32.3 | 43.7 | 42.3 | 40.9 | 53.6 | 77.4 | 75.3 | 94.3 | 92.1 | 136 | 133 | 130 |
|
| 规格 | |
| M | 对应螺栓规格 |
| | d | 最小值=公称 |
| | 最大值 |
| | dc | 最大值=公称 |
| | 最小值 |
| | h | 公称 |
| | 最大值 |
| | 最小值 |
| | da | 最大值 |
| | 最小值 |
| | r | ≈ |
| | 千件重(钢制)≈kg |
| | M42 | M45 | M48 | M50 | M52 | M55 | M56 | M58 | M60 | M64 | M68 | M72 | M76 | M80 | M85 | M90 | | 43 | 46 | 50 | 52 | 54 | 57 | 58 | 60 | 62 | 66 | 70 | 74 | 78 | 82 | 87 | 93 | | 43.62 | 46.62 | 50.62 | 52.74 | 54.74 | 57.74 | 58.74 | 60.74 | 62.74 | 66.74 | 70.74 | 74.74 | 78.74 | 82.87 | 87.87 | 93.87 | | 78 | 85 | 92 | 92 | 98 | 105 | 105 | 110 | 110 | 115 | 120 | 125 | 135 | 140 | 145 | 160 | | 76.80 | 83.60 | 90.60 | 90.60 | 96.60 | 103.60 | 103.60 | 108.60 | 108.60 | 113.60 | 118.60 | 123.40 | 133.40 | 138.40 | 143.40 | 158.40 | | 7 | 7 | 8 | 8 | 8 | 9 | 9 | 9 | 9 | 9 | 10 | 10 | 10 | 12 | 12 | 12 | | 8 | 8 | 9 | 9 | 9 | 10 | 10 | 10 | 10 | 10 | 11 | 11 | 11 | 13.2 | 13.2 | 13.2 | | 6 | 6 | 7 | 7 | 7 | 8 | 8 | 8 | 8 | 8 | 9 | 9 | 9 | 10.8 | 10.8 | 10.8 | | 45.6 | 48.6 | 52.6 | 54.6 | 56.6 | 60 | 63 | 65 | 67 | 71 | 75 | 79 | 83 | 87 | 92 | 97 | | 45 | 48 | 52 | 54 | 56 | 59 | 62 | 64 | 66 | 70 | 74 | 78 | 82 | 86 | 91 | 96 | | 1.3 | 1.3 | 1.3 | 1.3 | 1.3 | 1.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2 | | 183 | 220 | 294 | 284 | 330 | 431 | 425 | 472 | 458 | 492 | 586 | 626 | 749 | 953 | 996 | 1250 |
|
| 规格 | |
| M | 对应螺栓规格 |
| | d | 最小值=公称 |
| | 最大值 |
| | dc | 最大值=公称 |
| | 最小值 |
| | h | 公称 |
| | 最大值 |
| | 最小值 |
| | da | 最大值 |
| | 最小值 |
| | r | ≈ |
| | 千件重(钢制)≈kg |
| | M95 | M100 | M105 | M110 | M115 | M120 | M125 | M130 | M135 | M140 | M145 | M150 | M160 | | 98 | 104 | 109 | 114 | 119 | 124 | 129 | 134 | 139 | 144 | 149 | 155 | 165 | | 98.87 | 104.87 | 109.87 | 114.87 | 119.87 | 125 | 130 | 135 | 140 | 145 | 150 | 156 | 166 | | 165 | 175 | 180 | 185 | 200 | 210 | 220 | 220 | 230 | 240 | 250 | 250 | 250 | | 163.40 | 173.40 | 178.40 | 183.15 | 198.15* | 208.15 | 218.15 | 218.15 | 228.15 | 238.15 | 248.15 | 248.15 | 248.15 | | 12 | 14 | 14 | 14 | 14 | 16 | 16 | 16 | 16 | 18 | 18 | 18 | 18 | | 13.2 | 15.2 | 15.2 | 15.2 | 15.2 | 17.2 | 17.2 | 17.2 | 17.2 | 19.2 | 19.2 | 19.2 | 19.2 | | 10.8 | 12.8 | 12.8 | 12.8 | 12.8 | 14.8 | 14.8 | 14.8 | 14.8 | 16.8 | 16.8 | 16.8 | 16.8 | | 102 | 108 | 113 | 118 | 123 | 128 | 133 | 138 | 143 | 148 | 153 | 159 | 169 | | 101 | 107 | 112 | 117 | 122 | 127 | 132 | 137 | 142 | 147 | 152 | 158 | 168 | | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | | 1300 | 1710 | 1770 | 1830 | 2230 | 2830 | 3130 | 3000 | 3310 | 4090 | 4470 | 4270 | 3910 |
|
①,标准原文中Φ119对应dc最小值为188.15，但此处对应的偏差应为1.85mm，即实际最小值为200-1.85=198.15 mm。（DIN522中规定当h小于4且产品等级为A级时，d2的尺寸公差为h15，当dc为200mm时对应的偏差为1.85mm）。
②,②,材料：
1）钢 硬度等级300HV，硬度HV300-400（调质）；
2）不锈钢 硬度等级300HV，硬度HV300-400（调质）；不锈钢组别A2、A4、F1、C1或C4
3）根据协议，垫圈可由有色金属或其他材料制成
4）h不超过0.5 mm时，硬度等级为HV 2, h超过0.5 mm时，硬度等级为HV 10。（见原件技术条件） |
| 材料 ① | 种类 |
| | 机械性能 | 硬度等级 |
| | 硬度范围② |
| | 材料 (steel group) |
| | As specified in |
| | 公差 | 产品等级 |
| | 标准 |
| | 表面处理 | | 验收及包装 | | 说明 |
| | 钢 | 不锈钢 | | 140 HV | 200 HV | 140 HV | 200 HV | | 140 HV～250 HV | 200 HV～250 HV | 140 HV～250 HV | 200 HV～250 HV | | / | A2 and A4 F1 C1 and C4 | | / | DIN 267 (Part 11) | | A | | DIN 522 | Bright.
表面粗糙度 DIN 522
电镀 DIN 267 Part 9
如需其他表面处理，应由供需双方协议 | | DIN 522 | ① Washers may be made of non-ferrous metals or other materials, subject to agreement.
② For h not exceeding 0.5 mm, the hardness shall be HV 2 and for h exceeding 0.5 mm, HV 10. |
|
