DIN546 带槽圆螺母 slotted round nuts GB817-76
螺纹尺寸
d | |
| P | 螺距 |
| | da | 最小值 |
| | 最大值 |
| | dk | 最大值=公称 |
| | 最小值 |
| | m | 最大值=公称 |
| | 最小值 |
| | n | 公称 |
| | 最小值 |
| | 最大值 |
| | t | 最小值 |
| | 最大值 |
| | 千件重(钢制)≈kg |
| | 0.25 | 0.25 | 0.3 | 0.35 | 0.4 | 0.45 | 0.5 | 0.6 | 0.7 | | 1 | 1.2 | 1.4 | 1.6 | 2 | 2.5 | 3 | 3.45 | 4 | | 1.15 | 1.4 | 1.6 | 1.84 | 2.3 | 2.9 | 3.5 | 4 | 4.6 | | 2.5 | 3 | 3 | 3.5 | 4.5 | 5.5 | 6 | 7 | 8 | | 2.25 | 2.75 | 2.75 | 3.2 | 4.2 | 5.2 | 5.7 | 6.64 | 7.64 | | 1 | 1.2 | 1.4 | 1.6 | 2 | 2.2 | 2.5 | 3 | 3.5 | | 0.75 | 0.95 | 1.15 | 1.35 | 1.75 | 1.95 | 2.25 | 2.75 | 3.2 | | 0.3 | 0.4 | 0.4 | 0.5 | 1 | 1.2 | 1.2 | 1.4 | 1.4 | | 0.36 | 0.46 | 0.46 | 0.56 | 1.06 | 1.26 | 1.26 | 1.46 | 1.46 | | 0.5 | 0.6 | 0.6 | 0.7 | 1.2 | 1.51 | 1.51 | 1.71 | 1.71 | | 0.3 | 0.4 | 0.5 | 0.6 | 0.8 | 0.9 | 1 | 1 | 1.2 | | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1.1 | 1.2 | 1.4 | 1.6 | | 0.034 | 0.057 | 0.063 | 0.1 | 0.21 | 0.34 | 0.43 | 0.7 | 1.07 |
|
螺纹尺寸
d | |
| P | 螺距 |
| | da | 最小值 |
| | 最大值 |
| | dk | 最大值=公称 |
| | 最小值 |
| | m | 最大值=公称 |
| | 最小值 |
| | n | 公称 |
| | 最小值 |
| | 最大值 |
| | t | 最小值 |
| | 最大值 |
| | 千件重(钢制)≈kg |
| | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | | 5.75 | 6.75 | 8.75 | 10.8 | 13 | 15.1 | 17.3 | 19.5 | 21.6 | | 9 | 11 | 14 | 18 | 21 | 24 | 26 | 29 | 32 | | 8.64 | 10.57 | 13.57 | 17.57 | 20.48 | 23.48 | 25.48 | 28.48 | 31.38 | | 4.2 | 5 | 6.5 | 8 | 10 | 11 | 12 | 13 | 14 | | 3.9 | 4.7 | 6.14 | 7.64 | 9.64 | 10.57 | 11.57 | 12.57 | 13.57 | | 2 | 2.5 | 3 | 3.5 | 4 | 4 | 4 | 4 | 5 | | 2.06 | 2.56 | 3.06 | 3.57 | 4.07 | 4.07 | 4.07 | 4.07 | 5.07 | | 2.31 | 2.81 | 3.31 | 3.87 | 4.37 | 4.37 | 4.37 | 4.37 | 5.37 | | 1.5 | 2 | 2.5 | 3.2 | 3.8 | 3.8 | 3.8 | 4.8 | 4.8 | | 1.9 | 2.4 | 3 | 3.7 | 4.3 | 4.3 | 4.3 | 5.5 | 5.5 | | 1.8 | 2.73 | 5.57 | 11.5 | 21.5 | 27.1 | 36.8 | 48.4 | 57.2 |
|
